Y, YS type cold oil pump Overview: Y-type cold oil pump is a single-stage, single-suction, cantilever type centrifugal pump, YS, YS-1 type cold oil pump is a single-stage, double-suction pump body horizontal middle open centrifugal pump. YS-1 pump for both ends of the shaft, derived from YS. Y, YS, YS-1 pumps are suitable for petrochemical plants for the delivery of non-corrosive oil and petroleum products without solid particles and with an stoke of less than 120 centimetres. Medium temperature Y type pump -20 ~ 150℃, YS type pump -20 ~ 80℃. Pump inlet pressure shall not be higher than 0.6mpa. Parameters: flow Q 7.52 ~ 288 m3 / h head h 20 ~ 120 m model description: 50-60 ta 50 - Y Y - single suction pump suction diameter of 50 mm single stage suspension frame 60 - pump centrifugal pump design point head is 60 m T, by improving A - for the first time the pump structure, the change of the impeller diameter YS200 YS - 63 - A - 1 - open in the level of single stage, double suction centrifugal oil pump 200 - pump suction diameter is 200 mm 63 - pump design point head is 63 m - A change 1 - on both ends of the pump impeller diameter and shaft structure: Y - type pump axial inhalation and vertical inhalation up two kinds, spit up the outlet. YS, YS - 1 type pump suction inlet and outlet are under the center line of the pump shaft, in a vertical position with the axis of the pump. The separate surface of the pump cover of the pump body is on the center line of the shaft for easy maintenance. The shaft seal is the packing seal, and the support of the rotor is the rolling bearing for grease lubrication. Direction of rotation: From the motor end, the pump rotates counterclockwise, and the steering of YS-1 pump is the same as that of YS pump. Main parts material: the pump flow parts material for cast iron, cast steel, cast stainless steel three materials. Range of complete sets: Y-type cold oil pump complete sets supply explosion-proof motor, common base, coupling, etc. YS type cold oil pump in addition to the above accessories, also provides check valves, gate valves. When ordering, please indicate the material of main parts, if you have special requirements for pumps and motors, you can negotiate with our company about the technical requirements.